2/21/21 Fyi, To keep more up to date with what Im doing I started an page @mcmaven.pdx, where Im posting some of my 3D printing and other designs that I havent posted here.

(Download the Triaxial Tourbillon Clock Build Notes Pdf from the Thing Files page for the latest and more information.)

This original Triaxial Tourbillon remix is weight driven and the STLs are versions of A26s design that I modified to add support for ball bearings and some other features. Given the plastic escapement parts this remix was never meant to keep correct time, also it is very inefficient so the weight only keeps it working for a couple of hours. Therefore it is not a practical clock. I designed the Triaxial Quartz Movement Upgrade, which replaces the clock face in this remix, so it could be used to display the correct time when it was hanging on a wall.

The weight in this remix is painful to wind, so make it easier to animate I designed the Motorized Astronomia. For the Motorized Astronomia I basically started with a clean slate. All of the parts have been redesigned, with no intention to be compatible with my original remix.

However, jdirgo has done some great things with his make of the Motorized Astronomia (https://www.thingiverse.com/make:892383). Adapting the the gear driven hands of the remix to the Motorized version, and making a carbon fiber balance wheel to allow it to tick at an accurate rate.

Hopefully this information will help you know which design to download.

8/28/20 Because this was a remix of A26s design, I had only posted the parts that I changed. In the Build Notes I listed the files that needed to be downloaded from A26s page. But this has led to a lot of confusion. With A26s permission, I have posted the missing Stl files (listed below) to this page. Now all the necessary files for a make can be found on the Thing Files page. - balancespring - hands - moon - hourgear1 - hourgear2 - hourgear3 - sidebearingblock (print 2) - 12Tgear (print 2) - 24t20tgear - 24tgear - 39tgear - 10tbevel_3-1 (print 3) - 30tbevel_3-1 (print 2)

4/23/20 Adding this link to A26s page, because the latest website upgrade dropped the Maker link on the Thing Details page. To the get missing parts, go to A26s Triaxial Tourbillon Clock (Astronomia) page at https://www.thingiverse.com/thing:3061474

7/9/19 Updated the Triaxial Tourbillon Clock Make Pdf file. Added a table that lists and provides some details for all the Stl files to the end of the file. Also added Carriertop shaft whole and Whole Earth Stl files for Sls printers.

6/7/19 Due to popular demand I created a remix that replaces the mechanically driven clock hands with a quartz movement. Check it out at https://www.thingiverse.com/thing:3677946.

5/8/19 Check out my new Triple Axis Tourbillon design at https://www.thingiverse.com/thing:3615577 Its based on a Cabestan watch of of the same name.

5/1/19 Added a picture that shows the components of the Clock Face.

4/11/19 Added Main Frame-carriertop no shaft and Main Frame-carriertop shaft half STLs so you can print the carriertop separatly from the shaft if you have problems with the shaft of the Main Frame-carriertop breaking off. With this approach the fuses of the shaft are printed lengthwise, rather than around the circumference of the shaft, and you will not have reprint the whole carriertop if its shaft breaks.

3/13/19 If you like this, you might like my new design at https://www.thingiverse.com/thing:3486215

3/10/19 Added a detailed explanation of how I used Meshmixer manipulated the Earth STLs in the Triaxial Tourbillon Clock Build Notes Pdf file (section 2.1.12.1). And (section 2.1.4 Getting it to Tick) an explanation of what you need to pay attention to, to get it to tick reliably.

Added some of the intermediate Earth North Stl files that I had describe in the Pdf (Earth North 2 Mix.stl, Earth North 2 Mix Combined.stl, and Earth North 2 Mix Not Combined, both Solid.stl) to the distribution files.

3/6/19 Added corrections from comments and a picture that helps show how this is assembled to Clock Build Notes Pdf.

2/27/19 Added jay999s Euro parts sources to Clock Build Notes Pdf. I also added a Mainframebottom-72Tgearminuteadjuster 2.Stl. I found the original gear impossible to adjust the time with. I havent had tried it yet, but if anyone wants to test it, let me know if it works for you.

Parts list

(2) 3x6x2.5 ball bearings (4) 2x5x2.5mm ball bearings (9) 8x22x7mm ball bearings (3) 12x28x8mm (6001) ball bearings (~200mm) 2mm shaft (~100mm) 3mm shaft (18) M2x8 flat head screw (10) M2x8 cap screw (2) M2x10 cap screw (3) M2x20mm flat head screw (8) M2.5x8 cap screw (2) M3x8 hex socket head cap screw

3x6x2.5 ball bearings • 2 for the Balance Wheel 2x5x2.5mm ball bearings • 2 for the Fork • 2 for the Escape Wheel 8x22x7mm ball bearings • 1 for the Moon • 1 for the Earth • 2 for the Main Frame-32Crowngear and the Forkframe-forkframeconnector-1 • 1 for the Main Frame-24tgearplusshaft and the Main Frame-carriertop • 1 for the Clock Face-72tminute shaft halfs and the Main Frame-carriertop • 1 for the Clock Face-72tminute shaft halfs and the Clock Face-Face Plate • 2 for holding the Main Frame-carriertop center shaft in the Mainframebottom-mainframetop a. Note that I used A26’s bearingadapter.Stl as spacer between them. • 1 for holding the Mainframebottom-18tgearplusshaft 2 in the Mainframebottom-mainframetop c 12x28x8mm (6001) ball bearings • 1 for the lower 30tbevel gear • 1 for the lower drum • 1 for the upper 30tbevel gear 2mm shaft • 16mm long for the Tourbillon-15Tanchor2 (Fork) • 13mm long for the Tourbillon-15Tesc (Balance Wheel) • 13mm long (x3) to hold the three 10tbevel gears in the drum. • 12mm long for the Forkframe-40Tgear 2 • 18mm long for the hourgear2 • 14mm long between the Clock Face-72tminute shaft halfs and the Main Frame-carrierbottom • 13mm long between the Main Frame-24tgearplusshaft and the Main Frame-carrierbottom • 10mm long between the Main Frame-Earth North and the Main Frame-carriertop • 10mm long between the moon and the Main Frame-carriertop • 46mm long between the Mainframebottom-Mainframebottom2 and the Mainframebottom-18tgearplusshaft 2 3mm shaft • 51mm long between Forkframe-forkframe back 2 a

Источник: https://www.thingiverse.com/thing:3061474

Автор: make

Лицензия: Creative Commons - Attribution